PS(1) User Commands PS(1)
NAME
ps - report a snapshot of the current processes.
SYNOPSIS
ps [options]
DESCRIPTION
ps displays information about a selection of the active processes. If you want a
repetitive update of the selection and the displayed information, use top(1) instead.
This version of ps accepts several kinds of options:
1 UNIX options, which may be grouped and must be preceded by a dash.
2 BSD options, which may be grouped and must not be used with a dash.
3 GNU long options, which are preceded by two dashes.
Options of different types may be freely mixed, but conflicts can appear. There are some
synonymous options, which are functionally identical, due to the many standards and ps
implementations that this ps is compatible with.
Note that "ps -aux" is distinct from "ps aux". The POSIX and UNIX standards require that
"ps -aux" print all processes owned by a user named "x", as well as printing all processes
that would be selected by the -a option. If the user named "x" does not exist, this ps
may interpret the command as "ps aux" instead and print a warning. This behavior is
intended to aid in transitioning old scripts and habits. It is fragile, subject to
change, and thus should not be relied upon.
By default, ps selects all processes with the same effective user ID (euid=EUID) as the
current user and associated with the same terminal as the invoker. It displays the
process ID (pid=PID), the terminal associated with the process (tname=TTY), the cumulated
CPU time in [DD-]hh:mm:ss format (time=TIME), and the executable name (ucmd=CMD). Output
is unsorted by default.
The use of BSD-style options will add process state (stat=STAT) to the default display and
show the command args (args=COMMAND) instead of the executable name. You can override
this with the PS_FORMAT environment variable. The use of BSD-style options will also
change the process selection to include processes on other terminals (TTYs) that are owned
by you; alternately, this may be described as setting the selection to be the set of all
processes filtered to exclude processes owned by other users or not on a terminal. These
effects are not considered when options are described as being "identical" below, so -M
will be considered identical to Z and so on.
Except as described below, process selection options are additive. The default selection
is discarded, and then the selected processes are added to the set of processes to be
displayed. A process will thus be shown if it meets any of the given selection criteria.
EXAMPLES
To see every process on the system using standard syntax:
ps -e
ps -ef
ps -eF
ps -ely
To see every process on the system using BSD syntax:
ps ax
ps axu
To print a process tree:
ps -ejH
ps axjf
To get info about threads:
ps -eLf
ps axms
To get security info:
ps -eo euser,ruser,suser,fuser,f,comm,label
ps axZ
ps -eM
To see every process running as root (real & effective ID) in user format:
ps -U root -u root u
To see every process with a user-defined format:
ps -eo pid,tid,class,rtprio,ni,pri,psr,pcpu,stat,wchan:14,comm
ps axo stat,euid,ruid,tty,tpgid,sess,pgrp,ppid,pid,pcpu,comm
ps -Ao pid,tt,user,fname,tmout,f,wchan
Print only the process IDs of syslogd:
ps -C syslogd -o pid=
Print only the name of PID 42:
ps -q 42 -o comm=
SIMPLE PROCESS SELECTION
a Lift the BSD-style "only yourself" restriction, which is imposed upon the set of
all processes when some BSD-style (without "") options are used or when the ps
personality setting is BSD-like. The set of processes selected in this manner is
in addition to the set of processes selected by other means. An alternate
description is that this option causes ps to list all processes with a terminal
(tty), or to list all processes when used together with the x option.
-A Select all processes. Identical to -e.
-a Select all processes except both session leaders (see getsid(2)) and processes not
associated with a terminal.
-d Select all processes except session leaders.
--deselect
Select all processes except those that fulfill the specified conditions (negates
the selection). Identical to -N.
-e Select all processes. Identical to -A.
g Really all, even session leaders. This flag is obsolete and may be discontinued in
a future release. It is normally implied by the a flag, and is only useful when
operating in the sunos4 personality.
-N Select all processes except those that fulfill the specified conditions (negates
the selection). Identical to --deselect.
T Select all processes associated with this terminal. Identical to the t option
without any argument.
r Restrict the selection to only running processes.
x Lift the BSD-style "must have a tty" restriction, which is imposed upon the set of
all processes when some BSD-style (without "") options are used or when the ps
personality setting is BSD-like. The set of processes selected in this manner is
in addition to the set of processes selected by other means. An alternate
description is that this option causes ps to list all processes owned by you (same
EUID as ps), or to list all processes when used together with the a option.
PROCESS SELECTION BY LIST
These options accept a single argument in the form of a blank-separated or comma-separated
list. They can be used multiple times. For example: ps -p "1 2" -p 3,4
-123 Identical to --pid 123.
123 Identical to --pid 123.
-C cmdlist
Select by command name. This selects the processes whose executable name is given
in cmdlist.
-G grplist
Select by real group ID (RGID) or name. This selects the processes whose real
group name or ID is in the grplist list. The real group ID identifies the group of
the user who created the process, see getgid(2).
-g grplist
Select by session OR by effective group name. Selection by session is specified by
many standards, but selection by effective group is the logical behavior that
several other operating systems use. This ps will select by session when the list
is completely numeric (as sessions are). Group ID numbers will work only when some
group names are also specified. See the -s and --group options.
--Group grplist
Select by real group ID (RGID) or name. Identical to -G.
--group grplist
Select by effective group ID (EGID) or name. This selects the processes whose
effective group name or ID is in grplist. The effective group ID describes the
group whose file access permissions are used by the process (see getegid(2)). The
-g option is often an alternative to --group.
p pidlist
Select by process ID. Identical to -p and --pid.
-p pidlist
Select by PID. This selects the processes whose process ID numbers appear in
pidlist. Identical to p and --pid.
--pid pidlist
Select by process ID. Identical to -p and p.
--ppid pidlist
Select by parent process ID. This selects the processes with a parent process ID
in pidlist. That is, it selects processes that are children of those listed in
pidlist.
q pidlist
Select by process ID (quick mode). Identical to -q and --quick-pid.
-q pidlist
Select by PID (quick mode). This selects the processes whose process ID numbers
appear in pidlist. With this option ps reads the necessary info only for the pids
listed in the pidlist and doesn't apply additional filtering rules. The order of
pids is unsorted and preserved. No additional selection options, sorting and forest
type listings are allowed in this mode. Identical to q and --quick-pid.
--quick-pid pidlist
Select by process ID (quick mode). Identical to -q and q.
-s sesslist
Select by session ID. This selects the processes with a session ID specified in
sesslist.
--sid sesslist
Select by session ID. Identical to -s.
t ttylist
Select by tty. Nearly identical to -t and --tty, but can also be used with an
empty ttylist to indicate the terminal associated with ps. Using the T option is
considered cleaner than using t with an empty ttylist.
-t ttylist
Select by tty. This selects the processes associated with the terminals given in
ttylist. Terminals (ttys, or screens for text output) can be specified in several
forms: /dev/ttyS1, ttyS1, S1. A plain "" may be used to select processes not
attached to any terminal.
--tty ttylist
Select by terminal. Identical to -t and t.
U userlist
Select by effective user ID (EUID) or name. This selects the processes whose
effective user name or ID is in userlist. The effective user ID describes the user
whose file access permissions are used by the process (see geteuid(2)). Identical
to -u and --user.
-U userlist
Select by real user ID (RUID) or name. It selects the processes whose real user
name or ID is in the userlist list. The real user ID identifies the user who
created the process, see getuid(2).
-u userlist
Select by effective user ID (EUID) or name. This selects the processes whose
effective user name or ID is in userlist.
The effective user ID describes the user whose file access permissions are used by
the process (see geteuid(2)). Identical to U and --user.
--User userlist
Select by real user ID (RUID) or name. Identical to -U.
--user userlist
Select by effective user ID (EUID) or name. Identical to -u and U.
OUTPUT FORMAT CONTROL
These options are used to choose the information displayed by ps. The output may differ
by personality.
-c Show different scheduler information for the -l option.
--context
Display security context format (for SELinux).
-f Do full-format listing. This option can be combined with many other UNIX-style
options to add additional columns. It also causes the command arguments to be
printed. When used with -L, the NLWP (number of threads) and LWP (thread ID)
columns will be added. See the c option, the format keyword args, and the format
keyword comm.
-F Extra full format. See the -f option, which -F implies.
--format format
user-defined format. Identical to -o and o.
j BSD job control format.
-j Jobs format.
l Display BSD long format.
-l Long format. The -y option is often useful with this.
-M Add a column of security data. Identical to Z (for SELinux).
O format
is preloaded o (overloaded). The BSD O option can act like -O (user-defined output
format with some common fields predefined) or can be used to specify sort order.
Heuristics are used to determine the behavior of this option. To ensure that the
desired behavior is obtained (sorting or formatting), specify the option in some
other way (e.g. with -O or --sort). When used as a formatting option, it is
identical to -O, with the BSD personality.
-O format
Like -o, but preloaded with some default columns. Identical to -o pid,format,
state,tname,time,command or -o pid,format,tname,time,cmd, see -o below.
o format
Specify user-defined format. Identical to -o and --format.
-o format
User-defined format. format is a single argument in the form of a blank-separated
or comma-separated list, which offers a way to specify individual output columns.
The recognized keywords are described in the STANDARD FORMAT SPECIFIERS section
below. Headers may be renamed (ps -o pid,ruser=RealUser -o comm=Command) as
desired. If all column headers are empty (ps -o pid= -o comm=) then the header
line will not be output. Column width will increase as needed for wide headers;
this may be used to widen up columns such as WCHAN (ps -o pid,wchan=WIDE-WCHAN-
COLUMN -o comm). Explicit width control (ps opid,wchan:42,cmd) is offered too.
The behavior of ps -o pid=X,comm=Y varies with personality; output may be one
column named "X,comm=Y" or two columns named "X" and "Y". Use multiple -o options
when in doubt. Use the PS_FORMAT environment variable to specify a default as
desired; DefSysV and DefBSD are macros that may be used to choose the default UNIX
or BSD columns.
s Display signal format.
u Display user-oriented format.
v Display virtual memory format.
X Register format.
-y Do not show flags; show rss in place of addr. This option can only be used with
-l.
Z Add a column of security data. Identical to -M (for SELinux).
OUTPUT MODIFIERS
c Show the true command name. This is derived from the name of the executable file,
rather than from the argv value. Command arguments and any modifications to them
are thus not shown. This option effectively turns the args format keyword into the
comm format keyword; it is useful with the -f format option and with the various
BSD-style format options, which all normally display the command arguments. See
the -f option, the format keyword args, and the format keyword comm.
--cols n
Set screen width.
--columns n
Set screen width.
--cumulative
Include some dead child process data (as a sum with the parent).
e Show the environment after the command.
f ASCII art process hierarchy (forest).
--forest
ASCII art process tree.
h No header. (or, one header per screen in the BSD personality). The h option is
problematic. Standard BSD ps uses this option to print a header on each page of
output, but older Linux ps uses this option to totally disable the header. This
version of ps follows the Linux usage of not printing the header unless the BSD
personality has been selected, in which case it prints a header on each page of
output. Regardless of the current personality, you can use the long options
--headers and --no-headers to enable printing headers each page or disable headers
entirely, respectively.
-H Show process hierarchy (forest).
--headers
Repeat header lines, one per page of output.
k spec Specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. Choose a
multi-letter key from the STANDARD FORMAT SPECIFIERS section. The "+" is optional
since default direction is increasing numerical or lexicographic order. Identical
to --sort.
Examples:
ps jaxkuid,-ppid,+pid
ps axk comm o comm,args
ps kstart_time -ef
--lines n
Set screen height.
n Numeric output for WCHAN and USER (including all types of UID and GID).
--no-headers
Print no header line at all. --no-heading is an alias for this option.
O order
Sorting order (overloaded). The BSD O option can act like -O (user-defined output
format with some common fields predefined) or can be used to specify sort order.
Heuristics are used to determine the behavior of this option. To ensure that the
desired behavior is obtained (sorting or formatting), specify the option in some
other way (e.g. with -O or --sort).
For sorting, obsolete BSD O option syntax is O[+|-]k1[,[+|-]k2[,...]]. It orders
the processes listing according to the multilevel sort specified by the sequence of
one-letter short keys k1,k2, ... described in the OBSOLETE SORT KEYS section
below. The "+" is currently optional, merely re-iterating the default direction on
a key, but may help to distinguish an O sort from an O format. The "" reverses
direction only on the key it precedes.
--rows n
Set screen height.
S Sum up some information, such as CPU usage, from dead child processes into their
parent. This is useful for examining a system where a parent process repeatedly
forks off short-lived children to do work.
--sort spec
Specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. Choose a
multi-letter key from the STANDARD FORMAT SPECIFIERS section. The "+" is optional
since default direction is increasing numerical or lexicographic order. Identical
to k. For example: ps jax --sort=uid,-ppid,+pid
w Wide output. Use this option twice for unlimited width.
-w Wide output. Use this option twice for unlimited width.
--width n
Set screen width.
THREAD DISPLAY
H Show threads as if they were processes.
-L Show threads, possibly with LWP and NLWP columns.
m Show threads after processes.
-m Show threads after processes.
-T Show threads, possibly with SPID column.
OTHER INFORMATION
--help section
Print a help message. The section argument can be one of simple, list, output,
threads, misc or all. The argument can be shortened to one of the underlined
letters as in: s|l|o|t|m|a.
--info Print debugging info.
L List all format specifiers.
V Print the procps-ng version.
-V Print the procps-ng version.
--version
Print the procps-ng version.
NOTES
This ps works by reading the virtual files in /proc. This ps does not need to be setuid
kmem or have any privileges to run. Do not give this ps any special permissions.
CPU usage is currently expressed as the percentage of time spent running during the entire
lifetime of a process. This is not ideal, and it does not conform to the standards that
ps otherwise conforms to. CPU usage is unlikely to add up to exactly 100%.
The SIZE and RSS fields don't count some parts of a process including the page tables,
kernel stack, struct thread_info, and struct task_struct. This is usually at least 20 KiB
of memory that is always resident. SIZE is the virtual size of the process (code+data+
stack).
Processes marked <defunct> are dead processes (so-called "zombies") that remain because
their parent has not destroyed them properly. These processes will be destroyed by
init(8) if the parent process exits.
If the length of the username is greater than the length of the display column, the
username will be truncated. See the -o and -O formatting options to customize length.
Commands options such as ps -aux are not recommended as it is a confusion of two different
standards. According to the POSIX and UNIX standards, the above command asks to display
all processes with a TTY (generally the commands users are running) plus all processes
owned by a user named "x". If that user doesn't exist, then ps will assume you really
meant "ps aux".
PROCESS FLAGS
The sum of these values is displayed in the "F" column, which is provided by the flags
output specifier:
1 forked but didn't exec
4 used super-user privileges
PROCESS STATE CODES
Here are the different values that the s, stat and state output specifiers (header "STAT"
or "S") will display to describe the state of a process:
D uninterruptible sleep (usually IO)
R running or runnable (on run queue)
S interruptible sleep (waiting for an event to complete)
T stopped by job control signal
t stopped by debugger during the tracing
W paging (not valid since the 2.6.xx kernel)
X dead (should never be seen)
Z defunct ("zombie") process, terminated but not reaped by its parent
For BSD formats and when the stat keyword is used, additional characters may be displayed:
< high-priority (not nice to other users)
N low-priority (nice to other users)
L has pages locked into memory (for real-time and custom IO)
s is a session leader
l is multi-threaded (using CLONE_THREAD, like NPTL pthreads do)
+ is in the foreground process group
OBSOLETE SORT KEYS
These keys are used by the BSD O option (when it is used for sorting). The GNU --sort
option doesn't use these keys, but the specifiers described below in the STANDARD FORMAT
SPECIFIERS section. Note that the values used in sorting are the internal values ps uses
and not the "cooked" values used in some of the output format fields (e.g. sorting on tty
will sort into device number, not according to the terminal name displayed). Pipe ps
output into the sort(1) command if you want to sort the cooked values.
KEY LONG DESCRIPTION
c cmd simple name of executable
C pcpu cpu utilization
f flags flags as in long format F field
g pgrp process group ID
G tpgid controlling tty process group ID
j cutime cumulative user time
J cstime cumulative system time
k utime user time
m min_flt number of minor page faults
M maj_flt number of major page faults
n cmin_flt cumulative minor page faults
N cmaj_flt cumulative major page faults
o session session ID
p pid process ID
P ppid parent process ID
r rss resident set size
R resident resident pages
s size memory size in kilobytes
S share amount of shared pages
t tty the device number of the controlling tty
T start_time time process was started
U uid user ID number
u user user name
v vsize total VM size in KiB
y priority kernel scheduling priority
AIX FORMAT DESCRIPTORS
This ps supports AIX format descriptors, which work somewhat like the formatting codes of
printf(1) and printf(3). For example, the normal default output can be produced with
this: ps -eo "%p %y %x %c". The NORMAL codes are described in the next section.
CODE NORMAL HEADER
%C pcpu %CPU
%G group GROUP
%P ppid PPID
%U user USER
%a args COMMAND
%c comm COMMAND
%g rgroup RGROUP
%n nice NI
%p pid PID
%r pgid PGID
%t etime ELAPSED
%u ruser RUSER
%x time TIME
%y tty TTY
%z vsz VSZ
STANDARD FORMAT SPECIFIERS
Here are the different keywords that may be used to control the output format (e.g. with
option -o) or to sort the selected processes with the GNU-style --sort option.
For example: ps -eo pid,user,args --sort user
This version of ps tries to recognize most of the keywords used in other implementations
of ps.
The following user-defined format specifiers may contain spaces:
args, cmd, comm, command, fname, ucmd, ucomm, lstart, bsdstart, start.
Some keywords may not be available for sorting.
CODE HEADER DESCRIPTION
%cpu %CPU cpu utilization of the process in "##.#" format. Currently, it is
the CPU time used divided by the time the process has been running
(cputime/realtime ratio), expressed as a percentage. It will not
add up to 100% unless you are lucky. (alias pcpu).
%mem %MEM ratio of the process's resident set size to the physical memory on
the machine, expressed as a percentage. (alias pmem).
args COMMAND command with all its arguments as a string. Modifications to the
arguments may be shown. The output in this column may contain
spaces. A process marked <defunct> is partly dead, waiting to be
fully destroyed by its parent. Sometimes the process args will be
unavailable; when this happens, ps will instead print the executable
name in brackets. (alias cmd, command). See also the comm format
keyword, the -f option, and the c option.
When specified last, this column will extend to the edge of the
display. If ps can not determine display width, as when output is
redirected (piped) into a file or another command, the output width
is undefined (it may be 80, unlimited, determined by the TERM
variable, and so on). The COLUMNS environment variable or --cols
option may be used to exactly determine the width in this case. The
w or -w option may be also be used to adjust width.
blocked BLOCKED mask of the blocked signals, see signal(7). According to the width
of the field, a 32 or 64-bit mask in hexadecimal format is
displayed. (alias sig_block, sigmask).
bsdstart START time the command started. If the process was started less than 24
hours ago, the output format is " HH:MM", else it is " Mmm:SS"
(where Mmm is the three letters of the month). See also
lstart, start, start_time, and stime.
bsdtime TIME accumulated cpu time, user + system. The display format is usually
"MMM:SS", but can be shifted to the right if the process used more
than 999 minutes of cpu time.
c C processor utilization. Currently, this is the integer value of the
percent usage over the lifetime of the process. (see %cpu).
caught CAUGHT mask of the caught signals, see signal(7). According to the width
of the field, a 32 or 64 bits mask in hexadecimal format is
displayed. (alias sig_catch, sigcatch).
cgname CGNAME display name of control groups to which the process belongs.
cgroup CGROUP display control groups to which the process belongs.
class CLS scheduling class of the process. (alias policy, cls). Field's
possible values are:
- not reported
TS SCHED_OTHER
FF SCHED_FIFO
RR SCHED_RR
B SCHED_BATCH
ISO SCHED_ISO
IDL SCHED_IDLE
? unknown value
cls CLS scheduling class of the process. (alias policy, cls). Field's
possible values are:
- not reported
TS SCHED_OTHER
FF SCHED_FIFO
RR SCHED_RR
B SCHED_BATCH
ISO SCHED_ISO
IDL SCHED_IDLE
? unknown value
cmd CMD see args. (alias args, command).
comm COMMAND command name (only the executable name). Modifications to the
command name will not be shown. A process marked <defunct> is
partly dead, waiting to be fully destroyed by its parent. The
output in this column may contain spaces. (alias ucmd, ucomm). See
also the args format keyword, the -f option, and the c option.
When specified last, this column will extend to the edge of the
display. If ps can not determine display width, as when output is
redirected (piped) into a file or another command, the output width
is undefined (it may be 80, unlimited, determined by the TERM
variable, and so on). The COLUMNS environment variable or --cols
option may be used to exactly determine the width in this case. The
w or -w option may be also be used to adjust width.
command COMMAND See args. (alias args, command).
cp CP per-mill (tenths of a percent) CPU usage. (see %cpu).
cputime TIME cumulative CPU time, "[DD-]hh:mm:ss" format. (alias time).
drs DRS data resident set size, the amount of physical memory devoted to
other than executable code.
egid EGID effective group ID number of the process as a decimal integer.
(alias gid).
egroup EGROUP effective group ID of the process. This will be the textual group
ID, if it can be obtained and the field width permits, or a decimal
representation otherwise. (alias group).
eip EIP instruction pointer.
esp ESP stack pointer.
etime ELAPSED elapsed time since the process was started, in the form
[[DD-]hh:]mm:ss.
etimes ELAPSED elapsed time since the process was started, in seconds.
euid EUID effective user ID (alias uid).
euser EUSER effective user name. This will be the textual user ID, if it can be
obtained and the field width permits, or a decimal representation
otherwise. The n option can be used to force the decimal
representation. (alias uname, user).
f F flags associated with the process, see the PROCESS FLAGS section.
(alias flag, flags).
fgid FGID filesystem access group ID. (alias fsgid).
fgroup FGROUP filesystem access group ID. This will be the textual group ID, if
it can be obtained and the field width permits, or a decimal
representation otherwise. (alias fsgroup).
flag F see f. (alias f, flags).
flags F see f. (alias f, flag).
fname COMMAND first 8 bytes of the base name of the process's executable file.
The output in this column may contain spaces.
fuid FUID filesystem access user ID. (alias fsuid).
fuser FUSER filesystem access user ID. This will be the textual user ID, if it
can be obtained and the field width permits, or a decimal
representation otherwise.
gid GID see egid. (alias egid).
group GROUP see egroup. (alias egroup).
ignored IGNORED mask of the ignored signals, see signal(7). According to the width
of the field, a 32 or 64 bits mask in hexadecimal format is
displayed. (alias sig_ignore, sigignore).
ipcns IPCNS Unique inode number describing the namespace the process belongs to.
See namespaces(7).
label LABEL security label, most commonly used for SELinux context data. This
is for the Mandatory Access Control ("MAC") found on high-security
systems.
lstart STARTED time the command started. See also bsdstart, start, start_time,
and stime.
lsession SESSION displays the login session identifier of a process, if systemd
support has been included.
lwp LWP light weight process (thread) ID of the dispatchable entity (alias
spid, tid). See tid for additional information.
lxc LXC The name of the lxc container within which a task is running. If a
process is not running inside a container, a dash ('-') will be
shown.
machine MACHINE displays the machine name for processes assigned to VM or container,
if systemd support has been included.
maj_flt MAJFLT The number of major page faults that have occurred with this
process.
min_flt MINFLT The number of minor page faults that have occurred with this
process.
mntns MNTNS Unique inode number describing the namespace the process belongs to.
See namespaces(7).
netns NETNS Unique inode number describing the namespace the process belongs to.
See namespaces(7).
ni NI nice value. This ranges from 19 (nicest) to -20 (not nice to
others), see nice(1). (alias nice).
nice NI see ni.(alias ni).
nlwp NLWP number of lwps (threads) in the process. (alias thcount).
nwchan WCHAN address of the kernel function where the process is sleeping (use
wchan if you want the kernel function name). Running tasks will
display a dash ('-') in this column.
ouid OWNER displays the Unix user identifier of the owner of the session of a
process, if systemd support has been included.
pcpu %CPU see %cpu. (alias %cpu).
pending PENDING mask of the pending signals. See signal(7). Signals pending on the
process are distinct from signals pending on individual threads.
Use the m option or the -m option to see both. According to the
width of the field, a 32 or 64 bits mask in hexadecimal format is
displayed. (alias sig).
pgid PGID process group ID or, equivalently, the process ID of the process
group leader. (alias pgrp).
pgrp PGRP see pgid. (alias pgid).
pid PID a number representing the process ID (alias tgid).
pidns PIDNS Unique inode number describing the namespace the process belongs to.
See namespaces(7).
pmem %MEM see %mem. (alias %mem).
policy POL scheduling class of the process. (alias class, cls). Possible
values are:
- not reported
TS SCHED_OTHER
FF SCHED_FIFO
RR SCHED_RR
B SCHED_BATCH
ISO SCHED_ISO
IDL SCHED_IDLE
? unknown value
ppid PPID parent process ID.
pri PRI priority of the process. Higher number means lower priority.
psr PSR processor that process is currently assigned to.
rgid RGID real group ID.
rgroup RGROUP real group name. This will be the textual group ID, if it can be
obtained and the field width permits, or a decimal representation
otherwise.
rss RSS resident set size, the non-swapped physical memory that a task has
used (in kiloBytes). (alias rssize, rsz).
rssize RSS see rss. (alias rss, rsz).
rsz RSZ see rss. (alias rss, rssize).
rtprio RTPRIO realtime priority.
ruid RUID real user ID.
ruser RUSER real user ID. This will be the textual user ID, if it can be
obtained and the field width permits, or a decimal representation
otherwise.
s S minimal state display (one character). See section PROCESS STATE
CODES for the different values. See also stat if you want
additional information displayed. (alias state).
sched SCH scheduling policy of the process. The policies SCHED_OTHER
(SCHED_NORMAL), SCHED_FIFO, SCHED_RR, SCHED_BATCH, SCHED_ISO, and
SCHED_IDLE are respectively displayed as 0, 1, 2, 3, 4, and 5.
seat SEAT displays the identifier associated with all hardware devices
assigned to a specific workplace, if systemd support has been
included.
sess SESS session ID or, equivalently, the process ID of the session leader.
(alias session, sid).
sgi_p P processor that the process is currently executing on. Displays "*"
if the process is not currently running or runnable.
sgid SGID saved group ID. (alias svgid).
sgroup SGROUP saved group name. This will be the textual group ID, if it can be
obtained and the field width permits, or a decimal representation
otherwise.
sid SID see sess. (alias sess, session).
sig PENDING see pending. (alias pending, sig_pend).
sigcatch CAUGHT see caught. (alias caught, sig_catch).
sigignore IGNORED see ignored. (alias ignored, sig_ignore).
sigmask BLOCKED see blocked. (alias blocked, sig_block).
size SIZE approximate amount of swap space that would be required if the
process were to dirty all writable pages and then be swapped out.
This number is very rough!
slice SLICE displays the slice unit which a process belongs to, if systemd
support has been included.
spid SPID see lwp. (alias lwp, tid).
stackp STACKP address of the bottom (start) of stack for the process.
start STARTED time the command started. If the process was started less than 24
hours ago, the output format is "HH:MM:SS", else it is " Mmm dd"
(where Mmm is a three-letter month name). See also
lstart, bsdstart, start_time, and stime.
start_time START starting time or date of the process. Only the year will be
displayed if the process was not started the same year ps was
invoked, or "MmmDD" if it was not started the same day, or "HH:MM"
otherwise. See also bsdstart, start, lstart, and stime.
stat STAT multi-character process state. See section PROCESS STATE CODES for
the different values meaning. See also s and state if you just want
the first character displayed.
state S see s. (alias s).
suid SUID saved user ID. (alias svuid).
supgid SUPGID group ids of supplementary groups, if any. See getgroups(2).
supgrp SUPGRP group names of supplementary groups, if any. See getgroups(2).
suser SUSER saved user name. This will be the textual user ID, if it can be
obtained and the field width permits, or a decimal representation
otherwise. (alias svuser).
svgid SVGID see sgid. (alias sgid).
svuid SVUID see suid. (alias suid).
sz SZ size in physical pages of the core image of the process. This
includes text, data, and stack space. Device mappings are currently
excluded; this is subject to change. See vsz and rss.
tgid TGID a number representing the thread group to which a task belongs
(alias pid). It is the process ID of the thread group leader.
thcount THCNT see nlwp. (alias nlwp). number of kernel threads owned by the
process.
tid TID the unique number representing a dispatchable entity (alias
lwp, spid). This value may also appear as: a process ID (pid); a
process group ID (pgrp); a session ID for the session leader (sid);
a thread group ID for the thread group leader (tgid); and a tty
process group ID for the process group leader (tpgid).
time TIME cumulative CPU time, "[DD-]HH:MM:SS" format. (alias cputime).
tname TTY controlling tty (terminal). (alias tt, tty).
tpgid TPGID ID of the foreground process group on the tty (terminal) that the
process is connected to, or -1 if the process is not connected to a
tty.
trs TRS text resident set size, the amount of physical memory devoted to
executable code.
tt TT controlling tty (terminal). (alias tname, tty).
tty TT controlling tty (terminal). (alias tname, tt).
ucmd CMD see comm. (alias comm, ucomm).
ucomm COMMAND see comm. (alias comm, ucmd).
uid UID see euid. (alias euid).
uname USER see euser. (alias euser, user).
unit UNIT displays unit which a process belongs to, if systemd support has
been included.
user USER see euser. (alias euser, uname).
userns USERNS Unique inode number describing the namespace the process belongs to.
See namespaces(7).
utsns UTSNS Unique inode number describing the namespace the process belongs to.
See namespaces(7).
uunit UUNIT displays user unit which a process belongs to, if systemd support
has been included.
vsize VSZ see vsz. (alias vsz).
vsz VSZ virtual memory size of the process in KiB (1024-byte units). Device
mappings are currently excluded; this is subject to change. (alias
vsize).
wchan WCHAN name of the kernel function in which the process is sleeping, a ""
if the process is running, or a "*" if the process is multi-threaded
and ps is not displaying threads.
ENVIRONMENT VARIABLES
The following environment variables could affect ps:
COLUMNS
Override default display width.
LINES
Override default display height.
PS_PERSONALITY
Set to one of posix, old, linux, bsd, sun, digital... (see section PERSONALITY below).
CMD_ENV
Set to one of posix, old, linux, bsd, sun, digital... (see section PERSONALITY below).
I_WANT_A_BROKEN_PS
Force obsolete command line interpretation.
LC_TIME
Date format.
PS_COLORS
Not currently supported.
PS_FORMAT
Default output format override. You may set this to a format string of the type used
for the -o option. The DefSysV and DefBSD values are particularly useful.
POSIXLY_CORRECT
Don't find excuses to ignore bad "features".
POSIX2
When set to "on", acts as POSIXLY_CORRECT.
UNIX95
Don't find excuses to ignore bad "features".
_XPG
Cancel CMD_ENV=irix non-standard behavior.
In general, it is a bad idea to set these variables. The one exception is CMD_ENV or
PS_PERSONALITY, which could be set to Linux for normal systems. Without that setting, ps
follows the useless and bad parts of the Unix98 standard.
PERSONALITY
390 like the OS/390 OpenEdition ps
aix like AIX ps
bsd like FreeBSD ps (totally non-standard)
compaq like Digital Unix ps
debian like the old Debian ps
digital like Tru64 (was Digital Unix, was OSF/1) ps
gnu like the old Debian ps
hp like HP-UX ps
hpux like HP-UX ps
irix like Irix ps
linux ***** recommended *****
old like the original Linux ps (totally non-standard)
os390 like OS/390 Open Edition ps
posix standard
s390 like OS/390 Open Edition ps
sco like SCO ps
sgi like Irix ps
solaris2 like Solaris 2+ (SunOS 5) ps
sunos4 like SunOS 4 (Solaris 1) ps (totally non-standard)
svr4 standard
sysv standard
tru64 like Tru64 (was Digital Unix, was OSF/1) ps
unix standard
unix95 standard
unix98 standard
SEE ALSO
pgrep(1), pstree(1), top(1), proc(5).
STANDARDS
This ps conforms to:
1 Version 2 of the Single Unix Specification
2 The Open Group Technical Standard Base Specifications, Issue 6
3 IEEE Std 1003.1, 2004 Edition
4 X/Open System Interfaces Extension [UP XSI]
5 ISO/IEC 9945:2003
AUTHOR
ps was originally written by Branko Lankester <lankeste@fwi.uva.nl>. Michael K. Johnson
<johnsonm@redhat.com> re-wrote it significantly to use the proc filesystem, changing a few
things in the process. Michael Shields <mjshield@nyx.cs.du.edu> added the pid-list fea-
ture. Charles Blake <cblake@bbn.com> added multi-level sorting, the dirent-style library,
the device name-to-number mmaped database, the approximate binary search directly on Sys-
tem.map, and many code and documentation cleanups. David Mossberger-Tang wrote the
generic BFD support for psupdate. Albert Cahalan <albert@users.sf.net> rewrote ps for
full Unix98 and BSD support, along with some ugly hacks for obsolete and foreign syntax.
Please send bug reports to <procps@freelists.org>. No subscription is required or sug-
gested.
procps-ng August 2015 PS(1)
Man(1) output converted with
man2html