CPIO(1L) CPIO(1L)
NAME
cpio - copy files to and from archives
SYNOPSIS
Copy-out mode
In copy-out mode, cpio copies files into an archive. It reads a list of filenames, one
per line, on the standard input, and writes the archive onto the standard output. A typi-
cal way to generate the list of filenames is with the find command; you should give find
the -depth option to minimize problems with permissions on directories that are unread-
able. see "Options".
cpio {-o|--create} [-0acvABLV] [-C bytes] [-H format] [-M message] [-O [[user@]host:]ar-
chive] [-F [[user@]host:]archive] [--file=[[user@]host:]archive] [--format=format]
[--warning=FLAG] [--message=message][--null] [--reset-access-time] [--verbose] [--dot]
[--append] [--block-size=blocks] [--dereference] [--io-size=bytes] [--rsh-command=command]
[--license] [--usage] [--help] [--version] < name-list [> archive]
Copy-in mode
In copy-in mode, cpio copies files out of an archive or lists the archive contents. It
reads the archive from the standard input. Any non-option command line arguments are
shell globbing patterns; only files in the archive whose names match one or more of those
patterns are copied from the archive. Unlike in the shell, an initial `.' in a filename
does match a wildcard at the start of a pattern, and a `/' in a filename can match wild-
cards. If no patterns are given, all files are extracted. see "Options".
cpio {-i|--extract} [-bcdfmnrtsuvBSV] [-C bytes] [-E file] [-H format] [-M message] [-R
[user][:.][group]] [-I [[user@]host:]archive] [-F [[user@]host:]archive]
[--file=[[user@]host:]archive] [--make-directories] [--nonmatching] [--preserve-modifica-
tion-time] [--numeric-uid-gid] [--rename] [-t|--list] [--swap-bytes] [--swap] [--dot]
[--warning=FLAG] [--unconditional] [--verbose] [--block-size=blocks] [--swap-halfwords]
[--io-size=bytes] [--pattern-file=file] [--format=format] [--owner=[user][:.][group]]
[--no-preserve-owner] [--message=message] [--force-local] [--no-absolute-filenames]
[--absolute-filenames] [--sparse] [--only-verify-crc] [--to-stdout] [--quiet] [--rsh-com-
mand=command] [--license] [--usage] [--help] [--version] [pattern...] [< archive]
Copy-pass mode
In copy-pass mode, cpio copies files from one directory tree to another, combining the
copy-out and copy-in steps without actually using an archive. It reads the list of files
to copy from the standard input; the directory into which it will copy them is given as a
non-option argument. see "Options".
cpio {-p|--pass-through} [-0adlmuvLV] [-R [user][:.][group]] [--null] [--reset-access-
time] [--make-directories] [--link] [--quiet] [--preserve-modification-time] [--uncondi-
tional] [--verbose] [--dot] [--warning=FLAG] [--dereference] [--owner=[user][:.][group]]
[--no-preserve-owner] [--sparse] [--license] [--usage] [--help] [--version] destination-
directory < name-list
DESCRIPTION
GNU cpio is a tool for creating and extracting archives, or copying files from one place
to another. It handles a number of cpio formats as well as reading and writing tar files.
Following archive formats are supported: binary, old ASCII, new ASCII, crc, HPUX binary,
HPUX old ASCII, old tar, and POSIX.1 tar. The tar format is provided for compatibility
with the tar program. By default, cpio creates binary format archives, for compatibility
with older cpio programs. When extracting from archives, cpio automatically recognizes
which kind of archive it is reading and can read archives created on machines with a dif-
ferent byte-order.
OPTIONS
`-0, --null'
Read a list of filenames terminated by a null character, instead of a newline, so
that files whose names contain newlines can be archived. GNU find is one way to
produce a list of null-terminated filenames. This option may be used in copy-out
and copy-pass modes.
`-a, --reset-access-time'
Reset the access times of files after reading them, so that it does not look like
they have just been read.
`-A, --append'
Append to an existing archive. Only works in copy-out mode. The archive must be a
disk file specified with the -O or -F (-file) option.
`-b, --swap'
Swap both halfwords of words and bytes of halfwords in the data. Equivalent to
-sS. This option may be used in copy-in mode. Use this option to convert 32-bit
integers between big-endian and little-endian machines.
`-B' Set the I/O block size to 5120 bytes. Initially the block size is 512 bytes.
`--block-size=BLOCK-SIZE'
Set the I/O block size to BLOCK-SIZE * 512 bytes.
`-c' Identical to "-H newc", use the new (SVR4) portable format. If you wish the old
portable (ASCII) archive format, use "-H odc" instead.
`-C IO-SIZE, --io-size=IO-SIZE'
Set the I/O block size to IO-SIZE bytes.
`-d, --make-directories'
Create leading directories where needed.
`--device-independent, --reproducible'
Create reproducible archives. This is equivalent to --ignore-devno --renum-
ber-inodes.
`-E FILE, --pattern-file=FILE'
Read additional patterns specifying filenames to extract or list from FILE. The
lines of FILE are treated as if they had been non-option arguments to cpio. This
option is used in copy-in mode,
`-f, --nonmatching'
Only copy files that do not match any of the given patterns.
`-F, --file=archive'
Archive filename to use instead of standard input or output. To use a tape drive
on another machine as the archive, use a filename that starts with `HOSTNAME:'.
The hostname can be preceded by a username and an `@' to access the remote tape
drive as that user, if you have permission to do so (typically an entry in that
user's `~/.rhosts' file).
`--force-local'
With -F, -I, or -O, take the archive file name to be a local file even if it con-
tains a colon, which would ordinarily indicate a remote host name.
`-H FORMAT, --format=FORMAT'
Use archive format FORMAT. The valid formats are listed below; the same names are
also recognized in all-caps. The default in copy-in mode is to automatically
detect the archive format, and in copy-out mode is `bin'.
`bin' The obsolete binary format.
`odc' The old (POSIX.1) portable format.
`newc' The new (SVR4) portable format, which supports file systems having more than 65536
i-nodes.
`crc' The new (SVR4) portable format with a checksum (Sum32) added.
`tar' The old tar format.
`ustar'
The POSIX.1 tar format. Also recognizes GNU tar archives, which are similar but
not identical.
`hpbin'
The obsolete binary format used by HPUX's cpio (which stores device files differ-
ently).
`hpodc'
The portable format used by HPUX's cpio (which stores device files differently).
`-i, --extract'
Run in copy-in mode. see "Copy-in mode".
`-I archive'
Archive filename to use instead of standard input. To use a tape drive on another
machine as the archive, use a filename that starts with `HOSTNAME:'. The hostname
can be preceded by a username and an `@' to access the remote tape drive as that
user, if you have permission to do so (typically an entry in that user's
`~/.rhosts' file).
`--ignore-devno'
Store 0 in the device number field of each archive member, instead of the actual
device number.
`-k' Ignored; for compatibility with other versions of cpio.
`-l, --link'
Link files instead of copying them, when possible.
`-L, --dereference'
Copy the file that a symbolic link points to, rather than the symbolic link itself.
`-m, --preserve-modification-time'
Retain previous file modification times when creating files.
`-M MESSAGE, --message=MESSAGE'
Print MESSAGE when the end of a volume of the backup media (such as a tape or a
floppy disk) is reached, to prompt the user to insert a new volume. If MESSAGE
contains the string "%d", it is replaced by the current volume number (starting at
1).
`-n, --numeric-uid-gid'
Show numeric UID and GID instead of translating them into names when using the
`--verbose option'.
`--no-absolute-filenames'
Create all files relative to the current directory in copy-in mode, even if they
have an absolute file name in the archive.
`--absolute-filenames' (default)
Do not strip leading file name components that contain ".." and leading slashes
from file names in copy-in mode
`--no-preserve-owner'
Do not change the ownership of the files; leave them owned by the user extracting
them. This is the default for non-root users, so that users on System V don't
inadvertently give away files. This option can be used in copy-in mode and copy-
pass mode
`-o, --create'
Run in copy-out mode. see "Copy-out mode".
`-O archive'
Archive filename to use instead of standard output. To use a tape drive on another
machine as the archive, use a filename that starts with `HOSTNAME:'. The hostname
can be preceded by a username and an `@' to access the remote tape drive as that
user, if you have permission to do so (typically an entry in that user's
`~/.rhosts' file).
`--only-verify-crc'
Verify the Sum32 checksum's of each file in the archive, when reading a crc format
archive. Don't actually extract the files.
`-p, --pass-through'
Run in copy-pass mode. see "Copy-pass mode".
`--quiet'
Do not print the number of blocks copied.
`-r, --rename'
Interactively rename files.
`--renumber-inodes'
Renumber inodes when storing them in the archive.
`-R [user][:.][group], --owner [user][:.][group]'
Set the ownership of all files created to the specified user and/or group in copy-
out and copy-pass modes. Either the user, the group, or both, must be present. If
the group is omitted but the ":" or "." separator is given, use the given user's
login group. Only the super-user can change files' ownership.
`--rsh-command=COMMAND'
Notifies cpio that is should use COMMAND to communicate with remote devices.
`-s, --swap-bytes'
Swap the bytes of each halfword (pair of bytes) in the files.This option can be
used in copy-in mode.
`-S, --swap-halfwords'
Swap the halfwords of each word (4 bytes) in the files. This option may be used in
copy-in mode.
`--sparse'
Write files with large blocks of zeros as sparse files. This option is used in
copy-in and copy-pass modes.
`-t, --list'
Print a table of contents of the input.
`--to-stdout'
Extract files to standard output. This option may be used in copy-in mode.
`-u, --unconditional'
Replace all files, without asking whether to replace existing newer files with
older files.
`-v, --verbose'
List the files processed, or with `-t', give an `ls -l' style table of contents
listing. In a verbose table of contents of a ustar archive, user and group names
in the archive that do not exist on the local system are replaced by the names that
correspond locally to the numeric UID and GID stored in the archive.
`-V, --dot'
Print a `.' for each file processed.
`-W, --warning'
Control warning display. Currently FLAG is one of 'none', 'truncate', 'all'. Multi-
ple options accumulate.
`--license'
Print license and exit.
`?, --help'
Give a help page similar to this manpage.
`--usage'
Give a short usage message.
`--version'
Print the cpio program version number and exit.
EXAMPLES
When creating an archive, cpio takes the list of files to be processed from the standard
input, and then sends the archive to the standard output, or to the device defined by the
`-F' option. Usually find or ls is used to provide this list to the standard input. In
the following example you can see the possibilities for archiving the contents of a single
directory.
% ls | cpio -ov > directory.cpio
The `-o' option creates the archive, and the `-v' option prints the names of the files
archived as they are added. Notice that the options can be put together after a single
`-' or can be placed separately on the command line. The `>' redirects the cpio output to
the file `directory.cpio'.
If you wanted to archive an entire directory tree, the find command can provide the file
list to cpio:
% find . -print -depth | cpio -ov > tree.cpio
This will take all the files in the current directory, the directories below and place
them in the archive tree.cpio. Again the `-o' creates an archive, and the `-v' option
shows you the name of the files as they are archived. see "Copy-out mode". Using the `.'
in the find statement will give you more flexibility when doing restores, as it will save
file names with a relative path vice a hard wired, absolute path. The `-depth' option
forces `find' to print of the entries in a directory before printing the directory itself.
This limits the effects of restrictive directory permissions by printing the directory
entries in a directory before the directory name itself.
Extracting an archive requires a bit more thought because cpio will not create directories
by default. Another characteristic, is it will not overwrite existing files unless you
tell it to.
% cpio -iv < directory.cpio
This will retrieve the files archived in the file directory.cpio and place them in the
present directory. The `-i' option extracts the archive and the `-v' shows the file names
as they are extracted. If you are dealing with an archived directory tree, you need to
use the `-d' option to create directories as necessary, something like:
% cpio -idv < tree.cpio
This will take the contents of the archive tree.cpio and extract it to the current direc-
tory. If you try to extract the files on top of files of the same name that already exist
(and have the same or later modification time) cpio will not extract the file unless told
to do so by the -u option. see "Copy-in mode".
In copy-pass mode, cpio copies files from one directory tree to another, combining the
copy-out and copy-in steps without actually using an archive. It reads the list of files
to copy from the standard input; the directory into which it will copy them is given as a
non-option argument. see "Copy-pass mode".
% find . -depth -print0 | cpio --null -pvd new-dir
The example shows copying the files of the present directory, and sub-directories to a new
directory called new-dir. Some new options are the `-print0' available with GNU find,
combined with the `--null' option of cpio. These two options act together to send file
names between find and cpio, even if special characters are embedded in the file names.
Another is `-p', which tells cpio to pass the files it finds to the directory `new-dir'.
BUGS
The GNU folks, in general, abhor man pages, and create info documents instead. The main-
tainer of cpio falls into this category. Thus this man page may not be complete, nor
current, and was included in the Red Hat CVS tree because man is a great tool :).
REPORTING BUGS
Please report bugs via https://bugzilla.redhat.com.
SEE ALSO
The full documentation for cpio is maintained as a Texinfo manual. If the info and cpio
programs are properly installed at your site, the command
info cpio
should give you access to the complete manual. The online copy of the documentation is
available at the following address:
http://www.gnu.org/software/cpio/manual
CPIO(1L)
Man(1) output converted with
man2html